Metal Stud Sizes report
For the past 100 years, builders have used high-gauge metal and traditional wood studs to frame load-bearing walls. The cost, ease of construction, availability of skilled labor, and design constraints typically determine whether a builder uses metal or wood studs.
Metal studs are used for building anything from a balcony to a warehouse. There are many sizes of metal studs that you can use, as they are used for a wide variety of projects. Metal studs are the preferred material to use when building the walls of a structure because they are light and durable.
Before buying metal nails, the most important thing is to determine the correct size you need. Metal stud sizes are not common knowledge for most people. But there are times when it’s good to know the average dimensions and distance between them. Read on to learn more details about different sizes.
Metal Stud Size Guide
Metal stud framing is the skeleton of a building and provides the framework for the interior layout. These partitions define rooms, cubicles, and open spaces, and other interior areas will be positioned. There are many different metal stud sizes to choose from， which vary in width, thickness, and depth. It is important to consider the thickness of the frame, the size of the webbing, and the size of the flange and lip. Using these measurements will help you find the right size for your project.
Metal Stud Parts
- Webbing in metal studs is the space between the studs where plumbing and electrical wires are situated.
- The flange is the area where you will apply drywall or another enclosing material to the stud.
- The lip is the part of the stud where they connect with a screw.
Steel Framing Thickness
You need to know how thick you need the metal studs to be for your project. In general, the thicker the metal, the more heavy-duty the project. Because heavy-duty projects require a stronger foundation, there are some standard metal stud sizes related to thickness: The higher the gauge number, the thinner the stud is. The thicker the stud, the stronger the structure will be.
| Gauge(MILS) | MINIMUM THICKNESS (IN) | DESIGN THICKNESS (IN) |
|---|---|---|
| 18 Mil | 0.0179" | 0.0188" |
| 27 Mil | 0.0269" | 0.0283" |
| 30 Mil | 0.0296" | 0.0312" |
| 33 Mil | 0.0329" | 0.0346" |
| 43 Mil | 0.0428" | 0.0451" |
| 54 Mil | 0.0538" | 0.0566" |
| 68 Mil | 0.0677" | 0.0713" |
| 97 Mil | 0.0966" | 0.1017" |
Standard Web Sizes
The webbing determines how far apart your studs are. Below are a few standard webbing sizes:
- 1 5/8 inches
- 2 1/2 inches
- 3 1/2 inches
- 3 5/8 inches
- 4 inches
- 5 1/2 inches
- 6 inches
- 8 inches
- 10 inches
- 12 inches
- 14 inches
- 16 inches
Flange Sizes
Flange sizes are expressed in 1/100th of an inch, and the thickness is expressed in 1/1000th of an inch. This measurement is also known as "mils." Here are some typical flange sizes:
- 1 1/4 inches (31.75 mm)
- 1 3/8 inches
- 1 5/8 inches (41.3 mm)
- 2 inches (50.8 mm)
- 2 1/2 inches
- 3 inches
- 3 1/2 inches
Lip Sizes
Lip sizes are also one of the most important things to know because they determine how the pieces of metal studs will fit together. Here are a couple of typical metal stud sizes related to lip size.
- 1/2 inches (12.7 mm)
- 3/4 inches (19.1 mm)
When choosing a metal stud supplier, quality materials are a top priority. All the above information is for reference purposes only. We highly suggest consulting a professional before attempting any DIY home improvements or repairs.
