Golf Hole Size report
Golf originated in Scotland in the 15th century. At that time, shepherds used a stick to drive a sheep to play a game of hitting stones, which later evolved into golf. G: Green stands for green, O: Oxygen stands for oxygen, L: Light stands for sunshine, F: Friendship stands for friendship.
Before you learn golf, it is necessary to understand some basic knowledge of golf. For example, golf courses usually have 9 holes, 18 holes, 27 holes, 36 holes, etc. The distance between each hole is about 100-600 yards (90 meters-540 meters), the hole diameter is 10.795 cm, and the depth is about 10.5 cm. The game starts from the 1st hole and finishes 18 holes in turn.
The size of the hole was not always the same on every course. There was no standardized size for the hole when golf became popular in the late 15th century. Golf's governing bodies eventually agreed on a uniform hole size that remains in place today. You will learn more about golf hole size by reading the following article.
Standard Golf Hole Size
As the game became more popular worldwide in the 20th century, rules regarding the golf ball, clubs, and golf courses were needed to administer competitions properly. The size of the hole was essential to the game. In 1829, officials at the Royal Musselburgh Golf Club in Scotland invented the first known hole-cutter with 4.25 inches in diameter.
The oldest governing body, the Royal and Ancient Golf Club of St. Andrews, set the standard golf hole dimensions at 4 1/4 inches in diameter and at least 4 inches deep. On today's golf courses, holes are not only the same size but are structured in the same way.
Golf Hole Dimensions
While the styles and lengths of golf courses can vary greatly, from a monster-length links course to a short pitch-and-putt layout, there is one constant at every golf course the world over, and it is the dimensions of the holes.
- All golf holes cut into a green should be circular, with a diameter of 4 1/4 inches. It makes for a fairer game because golf hole size never changes.
- The minimum depth for a hole is 4 inches. Golf holes cannot be shallow, but most provide plenty of depth for a ball to drop in.
- The hole liner around the top of the cup must be sunk at least one inch into the ground. It is essential to have this hole liner dropped a bit so that the ball does not hit the cup and bounce out.
| Hole Shape | Diameter | Depth | Hole Liner Depth |
|---|---|---|---|
| Round | 4 1/4 inches (10.795 cm) | minimum 4 inches | at least 1 inch |
Other Golf Hole Basics
Golf Hole Reinforcing
While simply digging a hole can suffice for creating a regulation golf hole, it is recommended that supports be placed within the golf hole after it is dug to maintain the hole's integrity. Cups are often made of plastic and slide into the golf hole, resting just below the surface of the green.
Moving Holes
Regularly moving the golf holes on a course is essential in keeping the greens in top condition. A busy golf course will see hundreds of shots played into a given green in a day, and with all those shots aimed at the same hole location, a higher percentage of the shots will be focused around the hole. Moving holes is a great way to prevent an area from getting worn through.
